| 💥 ERROR | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS |
|---|---|---|---|---|---|
| 27 | 0 | 56 | 1091 | 46 | 894 |
| 1% | 0% | 3% | 52% | 2% | 42% |
Note: The following loglevels were omitted in this report: SKIP, INFO, PASS, DEBUG
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
The condition FontBakeryCondition:registered_vendor_ids had an error: ModuleNotFoundError: No module named 'bs4'
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
GF_Cyrillic_Core is almost fulfilled. Missing codepoints:
- 0x0403 (CYRILLIC CAPITAL LETTER GJE)
- 0x0400 (CYRILLIC CAPITAL LETTER IE WITH GRAVE)
- 0x040D (CYRILLIC CAPITAL LETTER I WITH GRAVE)
- 0x040C (CYRILLIC CAPITAL LETTER KJE)
- 0x040F (CYRILLIC CAPITAL LETTER DZHE)
- 0x0409 (CYRILLIC CAPITAL LETTER LJE)
- 0x040A (CYRILLIC CAPITAL LETTER NJE)
- 0x040B (CYRILLIC CAPITAL LETTER TSHE)
- 0x0402 (CYRILLIC CAPITAL LETTER DJE)
- 0x0453 (CYRILLIC SMALL LETTER GJE)
- 0x0450 (CYRILLIC SMALL LETTER IE WITH GRAVE)
- 0x045D (CYRILLIC SMALL LETTER I WITH GRAVE)
- 0x045C (CYRILLIC SMALL LETTER KJE)
- 0x045F (CYRILLIC SMALL LETTER DZHE)
- 0x0459 (CYRILLIC SMALL LETTER LJE)
- 0x045A (CYRILLIC SMALL LETTER NJE)
- 0x045B (CYRILLIC SMALL LETTER TSHE)
- 0x0452 (CYRILLIC SMALL LETTER DJE)
[code: missing-codepoints]
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
The condition FontBakeryCondition:hinting_stats had an error: ModuleNotFoundError: No module named 'dehinter'
This font file does not have a 'meta' table. [code: lacks-meta-table]
This font file does not have a 'meta' table. [code: lacks-meta-table]
This font file does not have a 'meta' table. [code: lacks-meta-table]
This font file does not have a 'meta' table. [code: lacks-meta-table]
This font file does not have a 'meta' table. [code: lacks-meta-table]
This font file does not have a 'meta' table. [code: lacks-meta-table]
This font file does not have a 'meta' table. [code: lacks-meta-table]
This font file does not have a 'meta' table. [code: lacks-meta-table]
This font file does not have a 'meta' table. [code: lacks-meta-table]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* three (U+0033): X=381.5,Y=1.0 (should be at baseline 0?)
* S (U+0053): X=244.5,Y=705.5 (should be at cap-height 707?)
* a (U+0061): X=288.5,Y=-1.0 (should be at baseline 0?)
* j (U+006A): X=84.0,Y=-2.0 (should be at baseline 0?)
* s (U+0073): X=335.5,Y=1.0 (should be at baseline 0?)
* cent (U+00A2): X=251.0,Y=-1.0 (should be at baseline 0?)
* section (U+00A7): X=362.0,Y=-0.5 (should be at baseline 0?)
* ordfeminine (U+00AA): X=100.0,Y=707.5 (should be at cap-height 707?)
* uni00B3 (U+00B3): X=311.5,Y=707.5 (should be at cap-height 707?)
* ordmasculine (U+00BA): X=112.0,Y=705.5 (should be at cap-height 707?)
* ordmasculine (U+00BA): X=274.0,Y=705.0 (should be at cap-height 707?)
* questiondown (U+00BF): X=156.0,Y=-1.0 (should be at baseline 0?)
* Oslash (U+00D8): X=470.0,Y=705.0 (should be at cap-height 707?)
* Oslash (U+00D8): X=294.0,Y=2.0 (should be at baseline 0?)
* agrave (U+00E0): X=288.5,Y=-1.0 (should be at baseline 0?)
* aacute (U+00E1): X=288.5,Y=-1.0 (should be at baseline 0?)
* acircumflex (U+00E2): X=288.5,Y=-1.0 (should be at baseline 0?)
* atilde (U+00E3): X=288.5,Y=-1.0 (should be at baseline 0?)
* atilde (U+00E3): X=297.0,Y=706.0 (should be at cap-height 707?)
* adieresis (U+00E4): X=288.5,Y=-1.0 (should be at baseline 0?)
* aring (U+00E5): X=288.5,Y=-1.0 (should be at baseline 0?)
* idieresis (U+00EF): X=-9.5,Y=707.5 (should be at cap-height 707?)
* idieresis (U+00EF): X=78.0,Y=707.5 (should be at cap-height 707?)
* idieresis (U+00EF): X=152.0,Y=707.5 (should be at cap-height 707?)
* idieresis (U+00EF): X=239.5,Y=707.5 (should be at cap-height 707?)
* eth (U+00F0): X=508.0,Y=706.0 (should be at cap-height 707?)
* ntilde (U+00F1): X=392.5,Y=706.5 (should be at cap-height 707?)
* otilde (U+00F5): X=393.5,Y=706.5 (should be at cap-height 707?)
* amacron (U+0101): X=288.5,Y=-1.0 (should be at baseline 0?)
* abreve (U+0103): X=288.5,Y=-1.0 (should be at baseline 0?)
* aogonek (U+0105): X=288.5,Y=-1.0 (should be at baseline 0?)
* itilde (U+0129): X=209.5,Y=706.5 (should be at cap-height 707?)
* ij (U+0133): X=307.0,Y=-2.0 (should be at baseline 0?)
* jcircumflex (U+0135): X=84.0,Y=-2.0 (should be at baseline 0?)
* Eng (U+014A): X=560.0,Y=-1.0 (should be at baseline 0?)
* eng (U+014B): X=432.0,Y=-2.0 (should be at baseline 0?)
* Sacute (U+015A): X=244.5,Y=705.5 (should be at cap-height 707?)
* sacute (U+015B): X=335.5,Y=1.0 (should be at baseline 0?)
* Scircumflex (U+015C): X=244.5,Y=705.5 (should be at cap-height 707?)
* scircumflex (U+015D): X=335.5,Y=1.0 (should be at baseline 0?)
* Scedilla (U+015E): X=244.5,Y=705.5 (should be at cap-height 707?)
* scedilla (U+015F): X=335.5,Y=1.0 (should be at baseline 0?)
* Scaron (U+0160): X=244.5,Y=705.5 (should be at cap-height 707?)
* scaron (U+0161): X=335.5,Y=1.0 (should be at baseline 0?)
* utilde (U+0169): X=384.5,Y=706.5 (should be at cap-height 707?)
* uni0218 (U+0218): X=244.5,Y=705.5 (should be at cap-height 707?)
* uni0219 (U+0219): X=335.5,Y=1.0 (should be at baseline 0?)
* uni0237 (U+0237): X=84.0,Y=-2.0 (should be at baseline 0?)
* tilde (U+02DC): X=95.5,Y=706.5 (should be at cap-height 707?)
* tildecomb (U+0303): X=95.5,Y=706.5 (should be at cap-height 707?)
* uni0405 (U+0405): X=241.0,Y=705.0 (should be at cap-height 707?)
* uni040E (U+040E): X=116.0,Y=-1.0 (should be at baseline 0?)
* uni040E (U+040E): X=116.0,Y=-1.0 (should be at baseline 0?)
* uni0417 (U+0417): X=242.0,Y=706.5 (should be at cap-height 707?)
* uni0423 (U+0423): X=116.0,Y=-1.0 (should be at baseline 0?)
* uni0423 (U+0423): X=116.0,Y=-1.0 (should be at baseline 0?)
* uni0437 (U+0437): X=183.5,Y=1.5 (should be at baseline 0?)
* uni043B (U+043B): X=17.0,Y=-1.0 (should be at baseline 0?)
* uni043B (U+043B): X=17.0,Y=-1.0 (should be at baseline 0?)
* uni0443 (U+0443): X=367.0,Y=-2.0 (should be at baseline 0?)
* uni0455 (U+0455): X=335.5,Y=1.0 (should be at baseline 0?)
* uni0457 (U+0457): X=-9.5,Y=707.5 (should be at cap-height 707?)
* uni0457 (U+0457): X=78.0,Y=707.5 (should be at cap-height 707?)
* uni0457 (U+0457): X=152.0,Y=707.5 (should be at cap-height 707?)
* uni0457 (U+0457): X=239.5,Y=707.5 (should be at cap-height 707?)
* uni0458 (U+0458): X=84.0,Y=-2.0 (should be at baseline 0?)
* quoteright (U+2019): X=192.0,Y=707.5 (should be at cap-height 707?)
* arrowdown (U+2193): X=358.0,Y=-1.0 (should be at baseline 0?)
* uni21BA (U+21BA): X=237.0,Y=0.5 (should be at baseline 0?)
* uni21BB (U+21BB): X=704.5,Y=0.5 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* dollar (U+0024): X=276.0,Y=-1.0 (should be at baseline 0?)
* three (U+0033): X=389.0,Y=2.0 (should be at baseline 0?)
* f (U+0066): X=148.0,Y=708.5 (should be at cap-height 707?)
* s (U+0073): X=337.5,Y=0.5 (should be at baseline 0?)
* cent (U+00A2): X=245.0,Y=-1.0 (should be at baseline 0?)
* cent (U+00A2): X=362.0,Y=-2.0 (should be at baseline 0?)
* dieresis (U+00A8): X=468.5,Y=705.0 (should be at cap-height 707?)
* dieresis (U+00A8): X=231.5,Y=705.0 (should be at cap-height 707?)
* uni00B3 (U+00B3): X=317.5,Y=705.0 (should be at cap-height 707?)
* Oslash (U+00D8): X=460.0,Y=708.0 (should be at cap-height 707?)
* oslash (U+00F8): X=233.0,Y=1.0 (should be at baseline 0?)
* sacute (U+015B): X=337.5,Y=0.5 (should be at baseline 0?)
* scircumflex (U+015D): X=337.5,Y=0.5 (should be at baseline 0?)
* scedilla (U+015F): X=337.5,Y=0.5 (should be at baseline 0?)
* scaron (U+0161): X=337.5,Y=0.5 (should be at baseline 0?)
* uni0219 (U+0219): X=337.5,Y=0.5 (should be at baseline 0?)
* uni0405 (U+0405): X=242.5,Y=705.5 (should be at cap-height 707?)
* uni040E (U+040E): X=115.0,Y=-1.0 (should be at baseline 0?)
* uni040E (U+040E): X=115.0,Y=-1.0 (should be at baseline 0?)
* uni0417 (U+0417): X=240.5,Y=706.0 (should be at cap-height 707?)
* uni0417 (U+0417): X=419.5,Y=705.5 (should be at cap-height 707?)
* uni0423 (U+0423): X=115.0,Y=-1.0 (should be at baseline 0?)
* uni0423 (U+0423): X=115.0,Y=-1.0 (should be at baseline 0?)
* uni0431 (U+0431): X=320.0,Y=706.5 (should be at cap-height 707?)
* uni0437 (U+0437): X=186.0,Y=1.5 (should be at baseline 0?)
* uni043B (U+043B): X=14.0,Y=-1.0 (should be at baseline 0?)
* uni043B (U+043B): X=14.0,Y=-1.0 (should be at baseline 0?)
* uni0455 (U+0455): X=337.5,Y=0.5 (should be at baseline 0?)
* quoteright (U+2019): X=204.5,Y=708.0 (should be at cap-height 707?)
* quotedblright (U+201D): X=421.5,Y=708.5 (should be at cap-height 707?)
* quotedblright (U+201D): X=204.5,Y=708.5 (should be at cap-height 707?)
* uni20B4 (U+20B4): X=221.0,Y=1.0 (should be at baseline 0?)
* uni20B4 (U+20B4): X=395.5,Y=707.5 (should be at cap-height 707?)
* arrowdown (U+2193): X=365.0,Y=-2.0 (should be at baseline 0?)
* uni21BA (U+21BA): X=236.5,Y=0.5 (should be at baseline 0?)
* uni21BB (U+21BB): X=708.0,Y=0.5 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* comma (U+002C): X=91.0,Y=-2.0 (should be at baseline 0?)
* semicolon (U+003B): X=92.0,Y=-2.0 (should be at baseline 0?)
* b (U+0062): X=244.0,Y=1.0 (should be at baseline 0?)
* m (U+006D): X=222.0,Y=526.5 (should be at x-height 527?)
* p (U+0070): X=250.0,Y=1.0 (should be at baseline 0?)
* braceleft (U+007B): X=147.0,Y=706.0 (should be at cap-height 707?)
* braceright (U+007D): X=224.0,Y=706.0 (should be at cap-height 707?)
* section (U+00A7): X=193.5,Y=2.0 (should be at baseline 0?)
* section (U+00A7): X=344.5,Y=705.0 (should be at cap-height 707?)
* uni00B2 (U+00B2): X=137.0,Y=707.5 (should be at cap-height 707?)
* uni00B3 (U+00B3): X=136.5,Y=707.5 (should be at cap-height 707?)
* ordmasculine (U+00BA): X=186.0,Y=708.0 (should be at cap-height 707?)
* atilde (U+00E3): X=219.0,Y=708.0 (should be at cap-height 707?)
* atilde (U+00E3): X=157.0,Y=709.0 (should be at cap-height 707?)
* ntilde (U+00F1): X=271.0,Y=706.5 (should be at cap-height 707?)
* otilde (U+00F5): X=279.0,Y=706.5 (should be at cap-height 707?)
* Aogonek (U+0104): X=616.0,Y=1.0 (should be at baseline 0?)
* aogonek (U+0105): X=480.0,Y=1.0 (should be at baseline 0?)
* Eogonek (U+0118): X=585.0,Y=1.0 (should be at baseline 0?)
* eogonek (U+0119): X=337.0,Y=1.0 (should be at baseline 0?)
* uni0123 (U+0123): X=295.0,Y=705.0 (should be at cap-height 707?)
* itilde (U+0129): X=70.0,Y=706.5 (should be at cap-height 707?)
* Iogonek (U+012E): X=133.0,Y=1.0 (should be at baseline 0?)
* iogonek (U+012F): X=114.0,Y=1.0 (should be at baseline 0?)
* utilde (U+0169): X=261.0,Y=706.5 (should be at cap-height 707?)
* Uogonek (U+0172): X=405.0,Y=1.0 (should be at baseline 0?)
* uogonek (U+0173): X=329.0,Y=1.0 (should be at baseline 0?)
* ogonek (U+02DB): X=271.0,Y=1.0 (should be at baseline 0?)
* tilde (U+02DC): X=-23.0,Y=706.5 (should be at cap-height 707?)
* tildecomb (U+0303): X=-23.0,Y=706.5 (should be at cap-height 707?)
* uni0312 (U+0312): X=-10.0,Y=705.0 (should be at cap-height 707?)
* uni0328 (U+0328): X=19.0,Y=1.0 (should be at baseline 0?)
* uni040E (U+040E): X=109.0,Y=-1.0 (should be at baseline 0?)
* uni040E (U+040E): X=109.0,Y=-1.0 (should be at baseline 0?)
* uni0417 (U+0417): X=228.0,Y=-1.0 (should be at baseline 0?)
* uni0417 (U+0417): X=237.0,Y=708.0 (should be at cap-height 707?)
* uni0417 (U+0417): X=403.5,Y=2.0 (should be at baseline 0?)
* uni0423 (U+0423): X=109.0,Y=-1.0 (should be at baseline 0?)
* uni0423 (U+0423): X=109.0,Y=-1.0 (should be at baseline 0?)
* uni0431 (U+0431): X=349.0,Y=709.0 (should be at cap-height 707?)
* uni0437 (U+0437): X=172.0,Y=2.0 (should be at baseline 0?)
* uni0440 (U+0440): X=250.0,Y=1.0 (should be at baseline 0?)
* quotesinglbase (U+201A): X=92.0,Y=-2.0 (should be at baseline 0?)
* quotedblbase (U+201E): X=242.0,Y=-2.0 (should be at baseline 0?)
* quotedblbase (U+201E): X=92.0,Y=-2.0 (should be at baseline 0?)
* uni20B4 (U+20B4): X=371.5,Y=2.0 (should be at baseline 0?)
* uni2713 (U+2713): X=373.0,Y=2.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* dollar (U+0024): X=405.0,Y=709.0 (should be at cap-height 708?)
* Q (U+0051): X=455.0,Y=-2.0 (should be at baseline 0?)
* S (U+0053): X=253.5,Y=707.5 (should be at cap-height 708?)
* f (U+0066): X=143.0,Y=707.0 (should be at cap-height 708?)
* s (U+0073): X=339.5,Y=1.0 (should be at baseline 0?)
* cent (U+00A2): X=371.0,Y=-1.0 (should be at baseline 0?)
* section (U+00A7): X=373.0,Y=0.5 (should be at baseline 0?)
* dieresis (U+00A8): X=372.0,Y=706.0 (should be at cap-height 708?)
* dieresis (U+00A8): X=483.0,Y=706.0 (should be at cap-height 708?)
* dieresis (U+00A8): X=129.0,Y=706.0 (should be at cap-height 708?)
* dieresis (U+00A8): X=240.0,Y=706.0 (should be at cap-height 708?)
* degree (U+00B0): X=69.0,Y=707.0 (should be at cap-height 708?)
* questiondown (U+00BF): X=43.0,Y=1.0 (should be at baseline 0?)
* Oslash (U+00D8): X=449.0,Y=710.0 (should be at cap-height 708?)
* oslash (U+00F8): X=245.0,Y=-2.0 (should be at baseline 0?)
* Sacute (U+015A): X=253.5,Y=707.5 (should be at cap-height 708?)
* sacute (U+015B): X=339.5,Y=1.0 (should be at baseline 0?)
* Scircumflex (U+015C): X=253.5,Y=707.5 (should be at cap-height 708?)
* scircumflex (U+015D): X=339.5,Y=1.0 (should be at baseline 0?)
* Scedilla (U+015E): X=253.5,Y=707.5 (should be at cap-height 708?)
* scedilla (U+015F): X=339.5,Y=1.0 (should be at baseline 0?)
* Scaron (U+0160): X=253.5,Y=707.5 (should be at cap-height 708?)
* scaron (U+0161): X=339.5,Y=1.0 (should be at baseline 0?)
* uni0218 (U+0218): X=253.5,Y=707.5 (should be at cap-height 708?)
* uni0219 (U+0219): X=339.5,Y=1.0 (should be at baseline 0?)
* uni0405 (U+0405): X=243.5,Y=706.0 (should be at cap-height 708?)
* uni0437 (U+0437): X=188.0,Y=2.0 (should be at baseline 0?)
* uni0437 (U+0437): X=353.5,Y=2.0 (should be at baseline 0?)
* uni043B (U+043B): X=12.0,Y=-1.0 (should be at baseline 0?)
* uni043B (U+043B): X=12.0,Y=-1.0 (should be at baseline 0?)
* uni0455 (U+0455): X=339.5,Y=1.0 (should be at baseline 0?)
* quoteright (U+2019): X=217.5,Y=709.5 (should be at cap-height 708?)
* quotedblright (U+201D): X=447.0,Y=709.0 (should be at cap-height 708?)
* quotedblright (U+201D): X=217.5,Y=709.0 (should be at cap-height 708?)
* uni20B4 (U+20B4): X=221.5,Y=1.0 (should be at baseline 0?)
* uni20B4 (U+20B4): X=239.0,Y=707.5 (should be at cap-height 708?)
* uni20B4 (U+20B4): X=399.0,Y=708.5 (should be at cap-height 708?)
* uni21BA (U+21BA): X=236.0,Y=0.5 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* exclam (U+0021): X=112.5,Y=1.0 (should be at baseline 0?)
* dollar (U+0024): X=261.0,Y=2.0 (should be at baseline 0?)
* dollar (U+0024): X=266.0,Y=710.0 (should be at cap-height 708?)
* dollar (U+0024): X=408.0,Y=-1.0 (should be at baseline 0?)
* eight (U+0038): X=223.5,Y=706.5 (should be at cap-height 708?)
* eight (U+0038): X=404.0,Y=706.0 (should be at cap-height 708?)
* Q (U+0051): X=454.5,Y=-2.0 (should be at baseline 0?)
* asciicircum (U+005E): X=247.0,Y=710.0 (should be at cap-height 708?)
* asciicircum (U+005E): X=353.0,Y=710.0 (should be at cap-height 708?)
* g (U+0067): X=319.5,Y=-2.0 (should be at baseline 0?)
* r (U+0072): X=271.0,Y=526.0 (should be at x-height 527?)
* s (U+0073): X=179.5,Y=528.5 (should be at x-height 527?)
* s (U+0073): X=341.5,Y=0.5 (should be at baseline 0?)
* section (U+00A7): X=206.0,Y=1.0 (should be at baseline 0?)
* section (U+00A7): X=212.5,Y=709.0 (should be at cap-height 708?)
* dieresis (U+00A8): X=376.5,Y=707.0 (should be at cap-height 708?)
* dieresis (U+00A8): X=497.0,Y=707.0 (should be at cap-height 708?)
* dieresis (U+00A8): X=127.5,Y=707.0 (should be at cap-height 708?)
* dieresis (U+00A8): X=248.0,Y=707.0 (should be at cap-height 708?)
* uni00B2 (U+00B2): X=92.0,Y=707.0 (should be at cap-height 708?)
* atilde (U+00E3): X=333.0,Y=707.5 (should be at cap-height 708?)
* ntilde (U+00F1): X=344.0,Y=706.5 (should be at cap-height 708?)
* ntilde (U+00F1): X=391.0,Y=707.0 (should be at cap-height 708?)
* otilde (U+00F5): X=339.0,Y=706.5 (should be at cap-height 708?)
* otilde (U+00F5): X=386.0,Y=707.0 (should be at cap-height 708?)
* Aogonek (U+0104): X=672.0,Y=2.0 (should be at baseline 0?)
* aogonek (U+0105): X=501.0,Y=2.0 (should be at baseline 0?)
* ebreve (U+0115): X=249.0,Y=707.0 (should be at cap-height 708?)
* ebreve (U+0115): X=346.0,Y=707.0 (should be at cap-height 708?)
* Eogonek (U+0118): X=582.0,Y=2.0 (should be at baseline 0?)
* eogonek (U+0119): X=368.0,Y=2.0 (should be at baseline 0?)
* gcircumflex (U+011D): X=319.5,Y=-2.0 (should be at baseline 0?)
* gbreve (U+011F): X=319.5,Y=-2.0 (should be at baseline 0?)
* gbreve (U+011F): X=272.0,Y=707.0 (should be at cap-height 708?)
* gbreve (U+011F): X=369.0,Y=707.0 (should be at cap-height 708?)
* gdotaccent (U+0121): X=319.5,Y=-2.0 (should be at baseline 0?)
* uni0123 (U+0123): X=319.5,Y=-2.0 (should be at baseline 0?)
* itilde (U+0129): X=170.0,Y=706.5 (should be at cap-height 708?)
* itilde (U+0129): X=217.0,Y=707.0 (should be at cap-height 708?)
* ibreve (U+012D): X=83.0,Y=707.0 (should be at cap-height 708?)
* ibreve (U+012D): X=180.0,Y=707.0 (should be at cap-height 708?)
* Iogonek (U+012E): X=215.0,Y=2.0 (should be at baseline 0?)
* iogonek (U+012F): X=189.0,Y=2.0 (should be at baseline 0?)
* obreve (U+014F): X=252.0,Y=707.0 (should be at cap-height 708?)
* obreve (U+014F): X=349.0,Y=707.0 (should be at cap-height 708?)
* sacute (U+015B): X=341.5,Y=0.5 (should be at baseline 0?)
* scircumflex (U+015D): X=341.5,Y=0.5 (should be at baseline 0?)
* scedilla (U+015F): X=341.5,Y=0.5 (should be at baseline 0?)
* scaron (U+0161): X=341.5,Y=0.5 (should be at baseline 0?)
* utilde (U+0169): X=333.0,Y=706.5 (should be at cap-height 708?)
* utilde (U+0169): X=380.0,Y=707.0 (should be at cap-height 708?)
* ubreve (U+016D): X=246.0,Y=707.0 (should be at cap-height 708?)
* ubreve (U+016D): X=343.0,Y=707.0 (should be at cap-height 708?)
* Uogonek (U+0172): X=452.0,Y=2.0 (should be at baseline 0?)
* uogonek (U+0173): X=371.0,Y=2.0 (should be at baseline 0?)
* uni0219 (U+0219): X=341.5,Y=0.5 (should be at baseline 0?)
* breve (U+02D8): X=245.5,Y=707.0 (should be at cap-height 708?)
* breve (U+02D8): X=342.5,Y=707.0 (should be at cap-height 708?)
* ring (U+02DA): X=184.0,Y=706.0 (should be at cap-height 708?)
* ring (U+02DA): X=436.0,Y=706.0 (should be at cap-height 708?)
* ring (U+02DA): X=350.0,Y=707.0 (should be at cap-height 708?)
* ring (U+02DA): X=270.0,Y=707.0 (should be at cap-height 708?)
* ogonek (U+02DB): X=310.0,Y=2.0 (should be at baseline 0?)
* tilde (U+02DC): X=40.0,Y=706.5 (should be at cap-height 708?)
* tilde (U+02DC): X=87.0,Y=707.0 (should be at cap-height 708?)
* tildecomb (U+0303): X=40.0,Y=706.5 (should be at cap-height 708?)
* tildecomb (U+0303): X=87.0,Y=707.0 (should be at cap-height 708?)
* uni0306 (U+0306): X=-48.0,Y=707.0 (should be at cap-height 708?)
* uni0306 (U+0306): X=49.0,Y=707.0 (should be at cap-height 708?)
* uni0328 (U+0328): X=62.0,Y=2.0 (should be at baseline 0?)
* uni0405 (U+0405): X=244.0,Y=706.5 (should be at cap-height 708?)
* uni0417 (U+0417): X=438.0,Y=706.0 (should be at cap-height 708?)
* uni041B (U+041B): X=8.0,Y=-2.0 (should be at baseline 0?)
* uni041B (U+041B): X=8.0,Y=-2.0 (should be at baseline 0?)
* uni0437 (U+0437): X=359.0,Y=1.5 (should be at baseline 0?)
* uni043B (U+043B): X=9.0,Y=-1.0 (should be at baseline 0?)
* uni043B (U+043B): X=9.0,Y=-1.0 (should be at baseline 0?)
* uni0455 (U+0455): X=341.5,Y=0.5 (should be at baseline 0?)
* quoteright (U+2019): X=230.5,Y=710.0 (should be at cap-height 708?)
* quotedblright (U+201D): X=473.5,Y=709.5 (should be at cap-height 708?)
* quotedblright (U+201D): X=230.5,Y=709.5 (should be at cap-height 708?)
* uni20B4 (U+20B4): X=222.5,Y=1.0 (should be at baseline 0?)
* uni20B4 (U+20B4): X=238.0,Y=707.5 (should be at cap-height 708?)
* uni20B4 (U+20B4): X=401.5,Y=709.0 (should be at cap-height 708?)
* uni21BA (U+21BA): X=235.0,Y=0.5 (should be at baseline 0?)
* uni21BB (U+21BB): X=277.0,Y=-0.5 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* comma (U+002C): X=128.0,Y=-2.0 (should be at baseline 0?)
* three (U+0033): X=206.5,Y=0.5 (should be at baseline 0?)
* three (U+0033): X=374.0,Y=0.5 (should be at baseline 0?)
* S (U+0053): X=240.5,Y=705.0 (should be at cap-height 707?)
* a (U+0061): X=297.5,Y=-0.5 (should be at baseline 0?)
* j (U+006A): X=95.0,Y=-1.0 (should be at baseline 0?)
* s (U+0073): X=333.5,Y=1.0 (should be at baseline 0?)
* cent (U+00A2): X=257.0,Y=-2.0 (should be at baseline 0?)
* section (U+00A7): X=356.5,Y=-1.0 (should be at baseline 0?)
* agrave (U+00E0): X=297.5,Y=-0.5 (should be at baseline 0?)
* aacute (U+00E1): X=297.5,Y=-0.5 (should be at baseline 0?)
* acircumflex (U+00E2): X=297.5,Y=-0.5 (should be at baseline 0?)
* atilde (U+00E3): X=297.5,Y=-0.5 (should be at baseline 0?)
* adieresis (U+00E4): X=297.5,Y=-0.5 (should be at baseline 0?)
* aring (U+00E5): X=297.5,Y=-0.5 (should be at baseline 0?)
* aring (U+00E5): X=313.5,Y=707.5 (should be at cap-height 707?)
* aring (U+00E5): X=250.5,Y=707.5 (should be at cap-height 707?)
* eth (U+00F0): X=496.0,Y=709.0 (should be at cap-height 707?)
* amacron (U+0101): X=297.5,Y=-0.5 (should be at baseline 0?)
* abreve (U+0103): X=297.5,Y=-0.5 (should be at baseline 0?)
* aogonek (U+0105): X=297.5,Y=-0.5 (should be at baseline 0?)
* uni0122 (U+0122): X=334.0,Y=-304.0 (should be at descender -305?)
* uni0122 (U+0122): X=334.0,Y=-304.0 (should be at descender -305?)
* ij (U+0133): X=301.0,Y=-1.0 (should be at baseline 0?)
* jcircumflex (U+0135): X=95.0,Y=-1.0 (should be at baseline 0?)
* uni0136 (U+0136): X=274.0,Y=-304.0 (should be at descender -305?)
* uni0136 (U+0136): X=274.0,Y=-304.0 (should be at descender -305?)
* uni0137 (U+0137): X=221.0,Y=-304.0 (should be at descender -305?)
* uni0137 (U+0137): X=221.0,Y=-304.0 (should be at descender -305?)
* uni013B (U+013B): X=287.0,Y=-304.0 (should be at descender -305?)
* uni013B (U+013B): X=287.0,Y=-304.0 (should be at descender -305?)
* uni013C (U+013C): X=71.0,Y=-304.0 (should be at descender -305?)
* uni013C (U+013C): X=71.0,Y=-304.0 (should be at descender -305?)
* uni0145 (U+0145): X=328.0,Y=-304.0 (should be at descender -305?)
* uni0145 (U+0145): X=328.0,Y=-304.0 (should be at descender -305?)
* uni0146 (U+0146): X=257.0,Y=-304.0 (should be at descender -305?)
* uni0146 (U+0146): X=257.0,Y=-304.0 (should be at descender -305?)
* eng (U+014B): X=442.0,Y=-1.0 (should be at baseline 0?)
* uni0156 (U+0156): X=290.0,Y=-304.0 (should be at descender -305?)
* uni0156 (U+0156): X=290.0,Y=-304.0 (should be at descender -305?)
* uni0157 (U+0157): X=78.0,Y=-304.0 (should be at descender -305?)
* uni0157 (U+0157): X=78.0,Y=-304.0 (should be at descender -305?)
* Sacute (U+015A): X=240.5,Y=705.0 (should be at cap-height 707?)
* sacute (U+015B): X=333.5,Y=1.0 (should be at baseline 0?)
* Scircumflex (U+015C): X=240.5,Y=705.0 (should be at cap-height 707?)
* scircumflex (U+015D): X=333.5,Y=1.0 (should be at baseline 0?)
* Scedilla (U+015E): X=240.5,Y=705.0 (should be at cap-height 707?)
* scedilla (U+015F): X=333.5,Y=1.0 (should be at baseline 0?)
* Scaron (U+0160): X=240.5,Y=705.0 (should be at cap-height 707?)
* scaron (U+0161): X=333.5,Y=1.0 (should be at baseline 0?)
* uni0218 (U+0218): X=240.5,Y=705.0 (should be at cap-height 707?)
* uni0218 (U+0218): X=287.0,Y=-304.0 (should be at descender -305?)
* uni0218 (U+0218): X=287.0,Y=-304.0 (should be at descender -305?)
* uni0219 (U+0219): X=333.5,Y=1.0 (should be at baseline 0?)
* uni0219 (U+0219): X=216.0,Y=-304.0 (should be at descender -305?)
* uni0219 (U+0219): X=216.0,Y=-304.0 (should be at descender -305?)
* uni021A (U+021A): X=246.0,Y=-304.0 (should be at descender -305?)
* uni021A (U+021A): X=246.0,Y=-304.0 (should be at descender -305?)
* uni0237 (U+0237): X=95.0,Y=-1.0 (should be at baseline 0?)
* uni0326 (U+0326): X=-39.0,Y=-304.0 (should be at descender -305?)
* uni0326 (U+0326): X=-39.0,Y=-304.0 (should be at descender -305?)
* uni0405 (U+0405): X=240.5,Y=705.0 (should be at cap-height 707?)
* uni040E (U+040E): X=116.0,Y=-1.0 (should be at baseline 0?)
* uni040E (U+040E): X=116.0,Y=-1.0 (should be at baseline 0?)
* uni0423 (U+0423): X=116.0,Y=-1.0 (should be at baseline 0?)
* uni0423 (U+0423): X=116.0,Y=-1.0 (should be at baseline 0?)
* uni0430 (U+0430): X=297.5,Y=-0.5 (should be at baseline 0?)
* uni0437 (U+0437): X=182.0,Y=1.0 (should be at baseline 0?)
* uni043B (U+043B): X=19.0,Y=-1.0 (should be at baseline 0?)
* uni043B (U+043B): X=19.0,Y=-1.0 (should be at baseline 0?)
* uni0455 (U+0455): X=333.5,Y=1.0 (should be at baseline 0?)
* uni0458 (U+0458): X=95.0,Y=-1.0 (should be at baseline 0?)
* quotedblright (U+201D): X=368.5,Y=706.5 (should be at cap-height 707?)
* quotedblright (U+201D): X=179.5,Y=706.5 (should be at cap-height 707?)
* uni21BA (U+21BA): X=238.0,Y=1.0 (should be at baseline 0?)
* uni21BB (U+21BB): X=701.5,Y=0.5 (should be at baseline 0?)
* uni2713 (U+2713): X=373.0,Y=-1.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* three (U+0033): X=371.5,Y=2.0 (should be at baseline 0?)
* five (U+0035): X=233.5,Y=-1.5 (should be at baseline 0?)
* a (U+0061): X=205.5,Y=525.0 (should be at x-height 527?)
* b (U+0062): X=245.5,Y=1.5 (should be at baseline 0?)
* i (U+0069): X=99.0,Y=709.0 (should be at cap-height 707?)
* j (U+006A): X=137.0,Y=709.0 (should be at cap-height 707?)
* m (U+006D): X=227.5,Y=526.5 (should be at x-height 527?)
* uni00B2 (U+00B2): X=180.0,Y=705.0 (should be at cap-height 707?)
* uni00B3 (U+00B3): X=185.0,Y=706.0 (should be at cap-height 707?)
* edieresis (U+00EB): X=401.0,Y=709.0 (should be at cap-height 707?)
* edieresis (U+00EB): X=186.0,Y=709.0 (should be at cap-height 707?)
* eth (U+00F0): X=242.5,Y=705.0 (should be at cap-height 707?)
* odieresis (U+00F6): X=408.0,Y=709.0 (should be at cap-height 707?)
* odieresis (U+00F6): X=193.0,Y=709.0 (should be at cap-height 707?)
* udieresis (U+00FC): X=392.0,Y=709.0 (should be at cap-height 707?)
* udieresis (U+00FC): X=177.0,Y=709.0 (should be at cap-height 707?)
* ydieresis (U+00FF): X=405.0,Y=709.0 (should be at cap-height 707?)
* ydieresis (U+00FF): X=190.0,Y=709.0 (should be at cap-height 707?)
* Aogonek (U+0104): X=625.0,Y=2.0 (should be at baseline 0?)
* aogonek (U+0105): X=483.0,Y=2.0 (should be at baseline 0?)
* cdotaccent (U+010B): X=276.0,Y=709.0 (should be at cap-height 707?)
* edotaccent (U+0117): X=295.0,Y=709.0 (should be at cap-height 707?)
* Eogonek (U+0118): X=587.0,Y=2.0 (should be at baseline 0?)
* eogonek (U+0119): X=350.0,Y=2.0 (should be at baseline 0?)
* gdotaccent (U+0121): X=304.0,Y=709.0 (should be at cap-height 707?)
* uni0123 (U+0123): X=298.0,Y=708.0 (should be at cap-height 707?)
* Iogonek (U+012E): X=146.0,Y=2.0 (should be at baseline 0?)
* iogonek (U+012F): X=99.0,Y=709.0 (should be at cap-height 707?)
* iogonek (U+012F): X=125.0,Y=2.0 (should be at baseline 0?)
* Uogonek (U+0172): X=417.0,Y=2.0 (should be at baseline 0?)
* uogonek (U+0173): X=339.0,Y=2.0 (should be at baseline 0?)
* zdotaccent (U+017C): X=260.0,Y=709.0 (should be at cap-height 707?)
* ogonek (U+02DB): X=287.0,Y=2.0 (should be at baseline 0?)
* uni0307 (U+0307): X=1.0,Y=709.0 (should be at cap-height 707?)
* uni0308 (U+0308): X=107.0,Y=709.0 (should be at cap-height 707?)
* uni0308 (U+0308): X=-108.0,Y=709.0 (should be at cap-height 707?)
* uni0312 (U+0312): X=-6.0,Y=708.0 (should be at cap-height 707?)
* uni0328 (U+0328): X=32.0,Y=2.0 (should be at baseline 0?)
* uni040E (U+040E): X=111.0,Y=-1.0 (should be at baseline 0?)
* uni040E (U+040E): X=111.0,Y=-1.0 (should be at baseline 0?)
* uni0417 (U+0417): X=223.5,Y=0.5 (should be at baseline 0?)
* uni0417 (U+0417): X=239.5,Y=708.0 (should be at cap-height 707?)
* uni0423 (U+0423): X=111.0,Y=-1.0 (should be at baseline 0?)
* uni0423 (U+0423): X=111.0,Y=-1.0 (should be at baseline 0?)
* uni0430 (U+0430): X=173.5,Y=1.0 (should be at baseline 0?)
* uni0451 (U+0451): X=395.0,Y=709.0 (should be at cap-height 707?)
* uni0451 (U+0451): X=180.0,Y=709.0 (should be at cap-height 707?)
* wdieresis (U+1E85): X=514.0,Y=709.0 (should be at cap-height 707?)
* wdieresis (U+1E85): X=299.0,Y=709.0 (should be at cap-height 707?)
* uni20B4 (U+20B4): X=231.5,Y=-2.0 (should be at baseline 0?)
* uni21BA (U+21BA): X=240.5,Y=-1.5 (should be at baseline 0?)
* uni21BB (U+21BB): X=692.5,Y=-1.5 (should be at baseline 0?)
* uni2713 (U+2713): X=373.0,Y=1.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* three (U+0033): X=373.0,Y=1.0 (should be at baseline 0?)
* S (U+0053): X=238.5,Y=705.0 (should be at cap-height 707?)
* s (U+0073): X=332.0,Y=0.5 (should be at baseline 0?)
* y (U+0079): X=459.0,Y=2.0 (should be at baseline 0?)
* y (U+0079): X=528.0,Y=-2.0 (should be at baseline 0?)
* section (U+00A7): X=353.5,Y=-1.0 (should be at baseline 0?)
* registered (U+00AE): X=240.0,Y=708.0 (should be at cap-height 707?)
* ecircumflex (U+00EA): X=294.0,Y=706.0 (should be at cap-height 707?)
* icircumflex (U+00EE): X=104.0,Y=706.0 (should be at cap-height 707?)
* ntilde (U+00F1): X=172.5,Y=709.0 (should be at cap-height 707?)
* ocircumflex (U+00F4): X=299.0,Y=706.0 (should be at cap-height 707?)
* otilde (U+00F5): X=176.5,Y=709.0 (should be at cap-height 707?)
* ucircumflex (U+00FB): X=286.0,Y=706.0 (should be at cap-height 707?)
* yacute (U+00FD): X=459.0,Y=2.0 (should be at baseline 0?)
* yacute (U+00FD): X=528.0,Y=-2.0 (should be at baseline 0?)
* ydieresis (U+00FF): X=459.0,Y=2.0 (should be at baseline 0?)
* ydieresis (U+00FF): X=528.0,Y=-2.0 (should be at baseline 0?)
* ccircumflex (U+0109): X=276.0,Y=706.0 (should be at cap-height 707?)
* gcircumflex (U+011D): X=302.0,Y=706.0 (should be at cap-height 707?)
* uni0122 (U+0122): X=339.0,Y=-303.0 (should be at descender -305?)
* uni0122 (U+0122): X=339.0,Y=-303.0 (should be at descender -305?)
* itilde (U+0129): X=-18.5,Y=709.0 (should be at cap-height 707?)
* ij (U+0133): X=75.5,Y=708.0 (should be at cap-height 707?)
* ij (U+0133): X=149.0,Y=708.0 (should be at cap-height 707?)
* ij (U+0133): X=294.5,Y=708.0 (should be at cap-height 707?)
* ij (U+0133): X=369.0,Y=708.0 (should be at cap-height 707?)
* jcircumflex (U+0135): X=137.0,Y=706.0 (should be at cap-height 707?)
* uni0136 (U+0136): X=273.0,Y=-303.0 (should be at descender -305?)
* uni0136 (U+0136): X=273.0,Y=-303.0 (should be at descender -305?)
* uni0137 (U+0137): X=221.0,Y=-303.0 (should be at descender -305?)
* uni0137 (U+0137): X=221.0,Y=-303.0 (should be at descender -305?)
* uni013B (U+013B): X=288.0,Y=-303.0 (should be at descender -305?)
* uni013B (U+013B): X=288.0,Y=-303.0 (should be at descender -305?)
* uni013C (U+013C): X=69.0,Y=-303.0 (should be at descender -305?)
* uni013C (U+013C): X=69.0,Y=-303.0 (should be at descender -305?)
* uni0145 (U+0145): X=334.0,Y=-303.0 (should be at descender -305?)
* uni0145 (U+0145): X=334.0,Y=-303.0 (should be at descender -305?)
* uni0146 (U+0146): X=260.0,Y=-303.0 (should be at descender -305?)
* uni0146 (U+0146): X=260.0,Y=-303.0 (should be at descender -305?)
* uni0156 (U+0156): X=292.0,Y=-303.0 (should be at descender -305?)
* uni0156 (U+0156): X=292.0,Y=-303.0 (should be at descender -305?)
* uni0157 (U+0157): X=74.0,Y=-303.0 (should be at descender -305?)
* uni0157 (U+0157): X=74.0,Y=-303.0 (should be at descender -305?)
* Sacute (U+015A): X=238.5,Y=705.0 (should be at cap-height 707?)
* sacute (U+015B): X=332.0,Y=0.5 (should be at baseline 0?)
* Scircumflex (U+015C): X=238.5,Y=705.0 (should be at cap-height 707?)
* scircumflex (U+015D): X=332.0,Y=0.5 (should be at baseline 0?)
* scircumflex (U+015D): X=253.0,Y=706.0 (should be at cap-height 707?)
* Scedilla (U+015E): X=238.5,Y=705.0 (should be at cap-height 707?)
* scedilla (U+015F): X=332.0,Y=0.5 (should be at baseline 0?)
* Scaron (U+0160): X=238.5,Y=705.0 (should be at cap-height 707?)
* scaron (U+0161): X=332.0,Y=0.5 (should be at baseline 0?)
* utilde (U+0169): X=163.5,Y=709.0 (should be at cap-height 707?)
* uring (U+016F): X=320.5,Y=707.5 (should be at cap-height 707?)
* uring (U+016F): X=251.5,Y=707.5 (should be at cap-height 707?)
* wcircumflex (U+0175): X=414.0,Y=706.0 (should be at cap-height 707?)
* ycircumflex (U+0177): X=459.0,Y=2.0 (should be at baseline 0?)
* ycircumflex (U+0177): X=528.0,Y=-2.0 (should be at baseline 0?)
* ycircumflex (U+0177): X=298.0,Y=706.0 (should be at cap-height 707?)
* uni0218 (U+0218): X=238.5,Y=705.0 (should be at cap-height 707?)
* uni0218 (U+0218): X=289.0,Y=-303.0 (should be at descender -305?)
* uni0218 (U+0218): X=289.0,Y=-303.0 (should be at descender -305?)
* uni0219 (U+0219): X=332.0,Y=0.5 (should be at baseline 0?)
* uni0219 (U+0219): X=218.0,Y=-303.0 (should be at descender -305?)
* uni0219 (U+0219): X=218.0,Y=-303.0 (should be at descender -305?)
* uni021A (U+021A): X=248.0,Y=-303.0 (should be at descender -305?)
* uni021A (U+021A): X=248.0,Y=-303.0 (should be at descender -305?)
* tilde (U+02DC): X=-122.5,Y=709.0 (should be at cap-height 707?)
* uni0302 (U+0302): X=0.0,Y=706.0 (should be at cap-height 707?)
* tildecomb (U+0303): X=-122.5,Y=709.0 (should be at cap-height 707?)
* uni030A (U+030A): X=34.5,Y=707.5 (should be at cap-height 707?)
* uni030A (U+030A): X=-34.5,Y=707.5 (should be at cap-height 707?)
* uni0326 (U+0326): X=-36.0,Y=-303.0 (should be at descender -305?)
* uni0326 (U+0326): X=-36.0,Y=-303.0 (should be at descender -305?)
* uni0405 (U+0405): X=238.5,Y=705.0 (should be at cap-height 707?)
* uni040E (U+040E): X=114.0,Y=-1.0 (should be at baseline 0?)
* uni040E (U+040E): X=114.0,Y=-1.0 (should be at baseline 0?)
* uni0417 (U+0417): X=219.5,Y=1.5 (should be at baseline 0?)
* uni0417 (U+0417): X=241.5,Y=707.5 (should be at cap-height 707?)
* uni0423 (U+0423): X=114.0,Y=-1.0 (should be at baseline 0?)
* uni0423 (U+0423): X=114.0,Y=-1.0 (should be at baseline 0?)
* uni0431 (U+0431): X=424.0,Y=709.0 (should be at cap-height 707?)
* uni043B (U+043B): X=21.0,Y=-2.0 (should be at baseline 0?)
* uni043B (U+043B): X=21.0,Y=-2.0 (should be at baseline 0?)
* uni0455 (U+0455): X=332.0,Y=0.5 (should be at baseline 0?)
* uni0456 (U+0456): X=75.5,Y=708.0 (should be at cap-height 707?)
* uni0456 (U+0456): X=149.0,Y=708.0 (should be at cap-height 707?)
* uni0458 (U+0458): X=100.5,Y=708.0 (should be at cap-height 707?)
* uni0458 (U+0458): X=175.0,Y=708.0 (should be at cap-height 707?)
* ygrave (U+1EF3): X=459.0,Y=2.0 (should be at baseline 0?)
* ygrave (U+1EF3): X=528.0,Y=-2.0 (should be at baseline 0?)
* quotedblright (U+201D): X=345.5,Y=709.0 (should be at cap-height 707?)
* quotedblright (U+201D): X=169.5,Y=709.0 (should be at cap-height 707?)
* uni20B4 (U+20B4): X=225.5,Y=-0.5 (should be at baseline 0?)
* uni21BA (U+21BA): X=239.0,Y=-0.5 (should be at baseline 0?)
* uni21BB (U+21BB): X=696.5,Y=-0.5 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* exclam (U+0021): X=114.5,Y=2.0 (should be at baseline 0?)
* exclam (U+0021): X=212.0,Y=2.0 (should be at baseline 0?)
* dollar (U+0024): X=258.0,Y=709.0 (should be at cap-height 708?)
* dollar (U+0024): X=419.0,Y=707.0 (should be at cap-height 708?)
* three (U+0033): X=401.0,Y=706.5 (should be at cap-height 708?)
* eight (U+0038): X=223.0,Y=706.5 (should be at cap-height 708?)
* eight (U+0038): X=405.5,Y=706.5 (should be at cap-height 708?)
* question (U+003F): X=172.5,Y=706.0 (should be at cap-height 708?)
* Q (U+0051): X=453.5,Y=-2.0 (should be at baseline 0?)
* asciicircum (U+005E): X=248.0,Y=709.0 (should be at cap-height 708?)
* asciicircum (U+005E): X=365.0,Y=709.0 (should be at cap-height 708?)
* d (U+0064): X=358.0,Y=525.5 (should be at x-height 527?)
* q (U+0071): X=343.5,Y=2.0 (should be at baseline 0?)
* s (U+0073): X=184.0,Y=1.0 (should be at baseline 0?)
* s (U+0073): X=344.0,Y=1.0 (should be at baseline 0?)
* cent (U+00A2): X=227.0,Y=1.0 (should be at baseline 0?)
* cent (U+00A2): X=389.0,Y=1.0 (should be at baseline 0?)
* section (U+00A7): X=206.0,Y=1.0 (should be at baseline 0?)
* dieresis (U+00A8): X=511.5,Y=708.5 (should be at cap-height 708?)
* dieresis (U+00A8): X=256.5,Y=708.5 (should be at cap-height 708?)
* uni00B3 (U+00B3): X=105.5,Y=708.5 (should be at cap-height 708?)
* questiondown (U+00BF): X=337.5,Y=-2.0 (should be at baseline 0?)
* germandbls (U+00DF): X=468.5,Y=710.0 (should be at cap-height 708?)
* atilde (U+00E3): X=363.0,Y=707.0 (should be at cap-height 708?)
* ntilde (U+00F1): X=373.0,Y=707.0 (should be at cap-height 708?)
* otilde (U+00F5): X=367.0,Y=707.0 (should be at cap-height 708?)
* Aogonek (U+0104): X=679.0,Y=1.0 (should be at baseline 0?)
* aogonek (U+0105): X=504.0,Y=1.0 (should be at baseline 0?)
* Eogonek (U+0118): X=580.0,Y=1.0 (should be at baseline 0?)
* eogonek (U+0119): X=366.0,Y=1.0 (should be at baseline 0?)
* uni0123 (U+0123): X=391.5,Y=707.5 (should be at cap-height 708?)
* itilde (U+0129): X=202.0,Y=707.0 (should be at cap-height 708?)
* Iogonek (U+012E): X=225.0,Y=1.0 (should be at baseline 0?)
* iogonek (U+012F): X=199.0,Y=1.0 (should be at baseline 0?)
* sacute (U+015B): X=184.0,Y=1.0 (should be at baseline 0?)
* sacute (U+015B): X=344.0,Y=1.0 (should be at baseline 0?)
* scircumflex (U+015D): X=184.0,Y=1.0 (should be at baseline 0?)
* scircumflex (U+015D): X=344.0,Y=1.0 (should be at baseline 0?)
* scedilla (U+015F): X=184.0,Y=1.0 (should be at baseline 0?)
* scedilla (U+015F): X=344.0,Y=1.0 (should be at baseline 0?)
* scaron (U+0161): X=184.0,Y=1.0 (should be at baseline 0?)
* scaron (U+0161): X=344.0,Y=1.0 (should be at baseline 0?)
* utilde (U+0169): X=362.0,Y=707.0 (should be at cap-height 708?)
* Uogonek (U+0172): X=455.0,Y=1.0 (should be at baseline 0?)
* uogonek (U+0173): X=374.0,Y=1.0 (should be at baseline 0?)
* uni0219 (U+0219): X=184.0,Y=1.0 (should be at baseline 0?)
* uni0219 (U+0219): X=344.0,Y=1.0 (should be at baseline 0?)
* ring (U+02DA): X=183.0,Y=710.0 (should be at cap-height 708?)
* ring (U+02DA): X=449.0,Y=710.0 (should be at cap-height 708?)
* ogonek (U+02DB): X=308.0,Y=1.0 (should be at baseline 0?)
* tilde (U+02DC): X=67.0,Y=707.0 (should be at cap-height 708?)
* tildecomb (U+0303): X=67.0,Y=707.0 (should be at cap-height 708?)
* uni0312 (U+0312): X=66.5,Y=707.5 (should be at cap-height 708?)
* uni0328 (U+0328): X=63.0,Y=1.0 (should be at baseline 0?)
* uni0405 (U+0405): X=245.5,Y=706.5 (should be at cap-height 708?)
* uni0417 (U+0417): X=447.0,Y=706.0 (should be at cap-height 708?)
* uni041B (U+041B): X=7.0,Y=-1.0 (should be at baseline 0?)
* uni041B (U+041B): X=7.0,Y=-1.0 (should be at baseline 0?)
* uni0437 (U+0437): X=365.0,Y=1.0 (should be at baseline 0?)
* uni043B (U+043B): X=7.0,Y=-1.0 (should be at baseline 0?)
* uni043B (U+043B): X=7.0,Y=-1.0 (should be at baseline 0?)
* uni0455 (U+0455): X=184.0,Y=1.0 (should be at baseline 0?)
* uni0455 (U+0455): X=344.0,Y=1.0 (should be at baseline 0?)
* uni20B4 (U+20B4): X=223.0,Y=1.0 (should be at baseline 0?)
* uni20B4 (U+20B4): X=237.0,Y=708.5 (should be at cap-height 708?)
* uni20B4 (U+20B4): X=405.0,Y=710.0 (should be at cap-height 708?)
* uni21BA (U+21BA): X=234.5,Y=0.5 (should be at baseline 0?)
* uni21BA (U+21BA): X=680.0,Y=-0.5 (should be at baseline 0?)
* uni21BB (U+21BB): X=272.5,Y=-1.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have segments which seem very short:
* question (U+003F) contains a short segment B<<187.0,231.0>-<187.0,237.0>-<187.0,242.0>>
* question (U+003F) contains a short segment B<<291.0,230.0>-<291.0,227.0>-<290.5,224.5>>
* question (U+003F) contains a short segment B<<290.5,224.5>-<290.0,222.0>-<290.0,219.0>>
* paragraph (U+00B6) contains a short segment L<<251.0,314.0>--<244.0,314.0>>
* questiondown (U+00BF) contains a short segment B<<330.0,307.0>-<331.0,302.0>-<331.0,296.0>>
* questiondown (U+00BF) contains a short segment B<<227.0,297.0>-<227.0,300.0>-<227.5,302.0>>
* questiondown (U+00BF) contains a short segment B<<227.5,302.0>-<228.0,304.0>-<228.0,307.0>>
* uni045E (U+045E) contains a short segment L<<87.0,-129.0>--<95.0,-129.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* question (U+003F) contains a short segment B<<304.0,239.0>-<303.0,235.0>-<303.0,232.0>>
* question (U+003F) contains a short segment B<<303.0,232.0>-<303.0,229.0>-<303.0,225.0>>
* paragraph (U+00B6) contains a short segment L<<243.0,314.0>--<233.0,314.0>>
* questiondown (U+00BF) contains a short segment B<<220.0,289.0>-<221.0,292.0>-<221.0,295.0>>
* questiondown (U+00BF) contains a short segment B<<221.0,295.0>-<221.0,298.0>-<221.0,302.0>>
* uni045E (U+045E) contains a short segment L<<85.0,-114.0>--<95.0,-114.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* at (U+0040) contains a short segment L<<659.0,453.0>--<697.0,453.0>>
* M (U+004D) contains a short segment L<<431.0,195.0>--<409.0,195.0>>
* e (U+0065) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* r (U+0072) contains a short segment L<<334.0,494.0>--<327.0,494.0>>
* paragraph (U+00B6) contains a short segment L<<193.0,419.0>--<177.0,419.0>>
* ae (U+00E6) contains a short segment B<<908.0,284.0>-<909.0,276.0>-<909.0,268.0>>
* ae (U+00E6) contains a short segment B<<909.0,268.0>-<909.0,260.0>-<909.0,252.0>>
* egrave (U+00E8) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* eacute (U+00E9) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* ecircumflex (U+00EA) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* edieresis (U+00EB) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* emacron (U+0113) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* ebreve (U+0115) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* edotaccent (U+0117) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* eogonek (U+0119) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* ecaron (U+011B) contains a short segment B<<523.0,282.0>-<524.0,275.0>-<524.0,267.5>>
* Eng (U+014A) contains a short segment L<<467.0,-161.0>--<494.0,-161.0>>
* oe (U+0153) contains a short segment B<<974.0,294.0>-<975.0,284.0>-<975.5,273.5>>
* oe (U+0153) contains a short segment B<<975.5,273.5>-<976.0,263.0>-<976.0,252.0>>
* racute (U+0155) contains a short segment L<<334.0,494.0>--<327.0,494.0>>
* uni0157 (U+0157) contains a short segment L<<334.0,494.0>--<327.0,494.0>>
* rcaron (U+0159) contains a short segment L<<334.0,494.0>--<327.0,494.0>>
* uni041C (U+041C) contains a short segment L<<431.0,195.0>--<409.0,195.0>>
* uni0435 (U+0435) contains a short segment B<<523.0,279.0>-<524.0,272.0>-<524.0,265.5>>
* uni0435 (U+0435) contains a short segment B<<524.0,265.5>-<524.0,259.0>-<524.0,252.0>>
* uni043C (U+043C) contains a short segment L<<353.0,139.0>--<339.0,139.0>>
* uni0451 (U+0451) contains a short segment B<<523.0,279.0>-<524.0,272.0>-<524.0,265.5>>
* uni0451 (U+0451) contains a short segment B<<524.0,265.5>-<524.0,259.0>-<524.0,252.0>>
* uni045E (U+045E) contains a short segment L<<86.0,-204.0>--<89.0,-204.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* question (U+003F) contains a short segment B<<316.0,247.0>-<316.0,244.0>-<315.5,240.0>>
* question (U+003F) contains a short segment B<<315.5,240.0>-<315.0,236.0>-<315.0,232.0>>
* paragraph (U+00B6) contains a short segment L<<234.0,315.0>--<223.0,315.0>>
* questiondown (U+00BF) contains a short segment B<<214.0,280.0>-<214.0,284.0>-<214.5,288.0>>
* questiondown (U+00BF) contains a short segment B<<214.5,288.0>-<215.0,292.0>-<215.0,296.0>>
* uni045E (U+045E) contains a short segment L<<84.0,-98.0>--<95.0,-98.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* question (U+003F) contains a short segment B<<329.0,256.0>-<329.0,252.0>-<328.5,247.5>>
* question (U+003F) contains a short segment B<<328.5,247.5>-<328.0,243.0>-<328.0,238.0>>
* at (U+0040) contains a short segment B<<813.0,276.0>-<815.0,299.0>-<815.0,308.0>>
* paragraph (U+00B6) contains a short segment L<<226.0,315.0>--<212.0,315.0>>
* questiondown (U+00BF) contains a short segment B<<207.0,272.0>-<207.0,276.0>-<207.5,280.5>>
* questiondown (U+00BF) contains a short segment B<<207.5,280.5>-<208.0,285.0>-<208.0,291.0>>
* uni045E (U+045E) contains a short segment L<<82.0,-83.0>--<95.0,-83.0>>
* Euro (U+20AC) contains a short segment B<<292.0,380.0>-<292.0,369.0>-<291.0,355.5>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* question (U+003F) contains a short segment B<<191.0,213.0>-<190.0,218.0>-<190.0,223.5>>
* question (U+003F) contains a short segment B<<190.0,223.5>-<190.0,229.0>-<190.0,234.0>>
* at (U+0040) contains a short segment B<<531.5,-98.0>-<547.0,-97.0>-<561.5,-95.0>>
* at (U+0040) contains a short segment B<<561.5,-95.0>-<576.0,-93.0>-<597.0,-89.0>>
* paragraph (U+00B6) contains a short segment L<<260.0,314.0>--<255.0,314.0>>
* questiondown (U+00BF) contains a short segment B<<321.0,313.0>-<322.0,308.0>-<322.0,302.5>>
* questiondown (U+00BF) contains a short segment B<<322.0,302.5>-<322.0,297.0>-<322.0,292.0>>
* ae (U+00E6) contains a short segment B<<883.0,272.0>-<883.0,262.0>-<882.5,252.0>>
* ae (U+00E6) contains a short segment B<<882.5,252.0>-<882.0,242.0>-<881.0,232.0>>
* oe (U+0153) contains a short segment B<<938.0,268.0>-<937.0,259.0>-<937.0,250.0>>
* oe (U+0153) contains a short segment B<<937.0,250.0>-<937.0,241.0>-<936.0,232.0>>
* uni045E (U+045E) contains a short segment L<<89.0,-145.0>--<95.0,-145.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* question (U+003F) contains a short segment B<<196.0,207.0>-<196.0,211.0>-<196.0,215.5>>
* question (U+003F) contains a short segment B<<196.0,215.5>-<196.0,220.0>-<196.0,224.0>>
* M (U+004D) contains a short segment L<<437.0,192.0>--<409.0,192.0>>
* paragraph (U+00B6) contains a short segment L<<215.0,384.0>--<203.0,384.0>>
* questiondown (U+00BF) contains a short segment B<<306.0,321.0>-<306.0,317.0>-<306.0,312.5>>
* questiondown (U+00BF) contains a short segment B<<306.0,312.5>-<306.0,308.0>-<306.0,304.0>>
* ae (U+00E6) contains a short segment B<<900.0,280.0>-<900.0,271.0>-<900.0,262.5>>
* ae (U+00E6) contains a short segment B<<900.0,262.5>-<900.0,254.0>-<900.0,245.0>>
* oe (U+0153) contains a short segment B<<962.0,285.0>-<962.0,275.0>-<962.5,265.0>>
* oe (U+0153) contains a short segment B<<962.5,265.0>-<963.0,255.0>-<963.0,245.0>>
* uni041C (U+041C) contains a short segment L<<438.0,191.0>--<410.0,191.0>>
* uni043C (U+043C) contains a short segment L<<356.0,138.0>--<339.0,138.0>>
* uni045E (U+045E) contains a short segment L<<87.0,-184.0>--<91.0,-184.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* nine (U+0039) contains a short segment B<<491.0,347.0>-<491.0,354.0>-<491.0,363.5>>
* question (U+003F) contains a short segment B<<194.0,210.0>-<193.0,215.0>-<193.0,219.5>>
* question (U+003F) contains a short segment B<<193.0,219.5>-<193.0,224.0>-<193.0,229.0>>
* paragraph (U+00B6) contains a short segment L<<238.0,349.0>--<229.0,349.0>>
* questiondown (U+00BF) contains a short segment B<<313.0,317.0>-<314.0,312.0>-<314.0,307.5>>
* questiondown (U+00BF) contains a short segment B<<314.0,307.5>-<314.0,303.0>-<314.0,298.0>>
* ae (U+00E6) contains a short segment B<<891.0,276.0>-<892.0,267.0>-<891.5,257.5>>
* ae (U+00E6) contains a short segment B<<891.5,257.5>-<891.0,248.0>-<890.0,239.0>>
* oe (U+0153) contains a short segment B<<950.0,277.0>-<950.0,267.0>-<950.0,257.5>>
* oe (U+0153) contains a short segment B<<950.0,257.5>-<950.0,248.0>-<949.0,239.0>>
* uni043C (U+043C) contains a short segment L<<359.0,136.0>--<338.0,136.0>>
* uni045E (U+045E) contains a short segment L<<88.0,-165.0>--<93.0,-165.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* question (U+003F) contains a short segment B<<342.0,265.0>-<341.0,261.0>-<340.5,255.5>>
* question (U+003F) contains a short segment B<<340.5,255.5>-<340.0,250.0>-<340.0,244.0>>
* at (U+0040) contains a short segment B<<808.5,285.0>-<810.0,305.0>-<810.0,312.0>>
* s (U+0073) contains a short segment B<<203.0,368.0>-<203.0,361.0>-<209.0,353.5>>
* paragraph (U+00B6) contains a short segment L<<217.0,315.0>--<201.0,315.0>>
* questiondown (U+00BF) contains a short segment B<<200.0,264.0>-<201.0,269.0>-<201.5,274.0>>
* questiondown (U+00BF) contains a short segment B<<201.5,274.0>-<202.0,279.0>-<202.0,285.0>>
* germandbls (U+00DF) contains a short segment B<<494.0,175.0>-<494.0,184.0>-<489.0,192.5>>
* germandbls (U+00DF) contains a short segment B<<457.0,400.0>-<457.0,387.0>-<465.5,378.5>>
* sacute (U+015B) contains a short segment B<<203.0,368.0>-<203.0,361.0>-<209.0,353.5>>
* scircumflex (U+015D) contains a short segment B<<203.0,368.0>-<203.0,361.0>-<209.0,353.5>>
* scedilla (U+015F) contains a short segment B<<203.0,368.0>-<203.0,361.0>-<209.0,353.5>>
* scaron (U+0161) contains a short segment B<<203.0,368.0>-<203.0,361.0>-<209.0,353.5>>
* tbar (U+0167) contains a short segment L<<257.0,210.0>--<257.0,201.0>>
* uni0219 (U+0219) contains a short segment B<<203.0,368.0>-<203.0,361.0>-<209.0,353.5>>
* uni0424 (U+0424) contains a short segment L<<355.0,90.0>--<346.0,90.0>>
* uni0424 (U+0424) contains a short segment L<<536.0,642.0>--<542.0,642.0>>
* uni0455 (U+0455) contains a short segment B<<203.0,368.0>-<203.0,361.0>-<209.0,353.5>>
* uni045E (U+045E) contains a short segment L<<80.0,-67.0>--<95.0,-67.0>>
* Euro (U+20AC) contains a short segment B<<308.0,374.0>-<308.0,365.0>-<307.5,355.5>>
* Euro (U+20AC) contains a short segment B<<307.5,355.5>-<307.0,346.0>-<307.0,337.0>>
* uni20B4 (U+20B4) contains a short segment B<<384.0,496.5>-<389.0,506.0>-<389.0,514.0>>
* uni20B4 (U+20B4) contains a short segment B<<255.0,229.0>-<246.0,223.0>-<242.0,214.5>>
* uni20B4 (U+20B4) contains a short segment B<<242.0,214.5>-<238.0,206.0>-<238.0,198.0>> [code: found-short-segments]
The following glyphs have semi-vertical/semi-horizontal lines:
* exclam (U+0021): L<<104.0,177.0>--<102.0,707.0>>
* exclam (U+0021): L<<143.0,707.0>--<141.0,177.0>>
* exclamdown (U+00A1): L<<101.0,-181.0>--<103.0,349.0>>
* exclamdown (U+00A1): L<<140.0,349.0>--<142.0,-181.0>> [code: found-semi-vertical]
The following glyphs have semi-vertical/semi-horizontal lines:
* uni041B (U+041B): L<<119.0,434.0>--<121.0,708.0>>
* uni21BA (U+21BA): L<<625.0,542.0>--<624.0,361.0>>
* uni21BB (U+21BB): L<<325.0,361.0>--<324.0,542.0>> [code: found-semi-vertical]
No dotted circle glyph present [code: missing-dotted-circle]
No dotted circle glyph present [code: missing-dotted-circle]
No dotted circle glyph present [code: missing-dotted-circle]
No dotted circle glyph present [code: missing-dotted-circle]
No dotted circle glyph present [code: missing-dotted-circle]
No dotted circle glyph present [code: missing-dotted-circle]
No dotted circle glyph present [code: missing-dotted-circle]
No dotted circle glyph present [code: missing-dotted-circle]
No dotted circle glyph present [code: missing-dotted-circle]
Failed with ModuleNotFoundError: No module named 'shaperglot'
Failed with ModuleNotFoundError: No module named 'shaperglot'
Failed with ModuleNotFoundError: No module named 'shaperglot'
Failed with ModuleNotFoundError: No module named 'shaperglot'
Failed with ModuleNotFoundError: No module named 'shaperglot'
Failed with ModuleNotFoundError: No module named 'shaperglot'
Failed with ModuleNotFoundError: No module named 'shaperglot'
Failed with ModuleNotFoundError: No module named 'shaperglot'
Failed with ModuleNotFoundError: No module named 'shaperglot'